Search results

The purpose of the study was to develop the forming methodology for FML laminates with complex shapes, based on aluminium and epoxy-glass composite.

The subject of research encompassed Al/GFRP fibre metal laminates. Autoclave process has been selected for FML profiles production. The manufacturing process was followed by quality analysis for laminates produced.

The achievement of high stability and dimensional tolerance of thin-walled FML laminates is ensured by developed technology. The values of selected sections angles are significantly limited as a result of forming of FML laminates through the components performing. Failure to adhere to technological recommendations and to high regime of developer technology may lead to the occurrence of defects in FML.

Thin-walled composite structures could be applied in light-weight constructions, such as aircraft structures, which must meet rigorous requirements with regard to operation under complex load. The development of this type of technology may contribute to increased importance of FML sections in research area and finally to increased scope of their applications.

The production of thin-walled FML profiles with complex geometry, which would be characterized by dimensional stability and repeatable structural quality free of defects, is associated with many problems. No studies have been published so far on an effective forming process for FML laminates with complex shapes. Developed methodology has been verified through quality evaluation of produced profiles by means of non-destructive and destructive methods. The development of this type of technology may contribute to increased importance of FML, e.g. in aerospace technology.

The purpose of this paper was to compare the response of selected hybrid Fibre Metal Laminates (FMLs) in the form of glass and carbon fibre aluminium laminates to dynamic and static loads compared together.

The subject of examination was FMLs (Al/CFRP and Al/GFRP). The samples were subjected to low-velocity impact and quasi-static indentation. The response of laminates to the both types of loads was evaluated by comparison of force – displacement diagrams including the values of maximum forces as well as the extent and nature of structure degradation as a result of loads.

In case of Al/GFRP laminates, the analysis of characteristic relations, i.e. force – displacement and the impactor influence area in case of indentation and impact confirmed that certain parameters, i.e. the values of maximum force transferred by laminate, destruction surface area and destruction mechanisms are consistent after static and dynamic tests. Significant differences were found in destruction scale in Al/GFRP laminates despite considerable fitting of force – displacement diagrams to static and dynamic tests. Destruction surface area observed in FML carbon laminates subjected to dynamic loads was significantly smaller than after indentation but perforation area occurring at the unloaded side was much more extensive.

Research issues in the scope of dynamic loads by means of concentrated force in composite materials and interpretation of the effects of their impacts are extremely complex. Therefore, the attempts are made to predict the resistance to dynamic loads by means of concentrated force using statistical research methods. The test results might be useful for the design and simulations of FMLs applications in aerospace.

From the analysis of available literature, it appears that there are no studies exploring the issue of forecasting or comparison the effects of static and dynamic tests for hybrid FMLs. The new hybrid materials like FMLs have different mechanisms of damage initiation and propagation as a result of impact, in comparison to classic composite materials. It means that possibilities of using the static loads to predict impact resistance should be known well for all type of FMLs. Actually, there is no research about static indentation in relation to low-velocity impact of aluminium-carbon laminates. This situation encouraged the authors of the present study to undertake research in this scope. The results can demonstrate and explain why prediction of impact resistance of FMLs by using static indentation is uncertain and not always valuable.

The purpose of this paper is to present microstructural and fractographic analysis of damage in aluminum (2024T3)/carbon-fiber reinforced laminates (AlC) after static tensile test. The influence of fiber orientation on the failure was studied and discussed.

The subject of examination was AlC. The fiber–metal laminates (FMLs) were manufactured by stacking alternating layers of 2024-T3 aluminum alloy (0.3 mm per sheets) and carbon/epoxy composites made of unidirectional prepreg tape HexPly system (Hexcel, USA) in [0], [± 45] and [0/90]S configuration. The fractographic analysis was carried out after static tensile test on the damage area of the specimens. The mechanical tests have been performed in accordance to ASTM D3039. The microstructural and fractographic analysis of FMLs were studied using optical (Nikon SMZ1500, Japan) and scanning electron microscope (Zeiss Ultra Plus, Germany).

FMLs based on aluminum and carbon/epoxy composite are characterized by high tensile properties depending on their individual components and the orientation of the reinforcing fibers, failure of hybrid laminates indicates the complexity process of degradation of these materials. The nature of damage in FML layers is similar to that typical in polymer composites with interlaminar delaminations, transverse cracks of the composite layers, degradation of fiber/matrix interface, damage process in FMLs is also associated mainly with interface between metal and fiber reinforced composite. The mixed damage – cohesive and adhesive – was observed.

One of the most important aspect in the designing and manufacturing process in the service life of composite structures is damage mechanisms. The damage processes in composite materials, particularly in FMLs, are more complex in comparison to metal materials and fiber reinforced polymers.

The purpose of this study was to carry out the analysis of impact resistance for aluminum hybrid laminates and polymer matrix composites reinforced with glass and carbon fibers. Damage modes and damages process under varied impact energies are also presented and discussed.

The subject of examination were fiber metal laminates – FMLs (Al/CFRP and Al/GFRP). The samples were subjected to low-velocity impact by using a drop-weight impact tester. The specimens after impact were examined using non-destructive and destructive inspection techniques.

The hybrid laminates are characterized by higher resistance to impact in comparison to the conventional laminates. The delaminations between composite layers as well as the delaminations on metal/composite interface and lateral cracks are the prevailing type of destruction mechanisms. No significant relationships between metal volume friction coefficient vs response to the impact were recorded for the hybrid laminates under tests.

The understanding of impact behavior of FMLs is particularly important for selecting these materials and their designing, in damage tolerance philosophy aspect in aerospace industry as well as in searching the methods of predicting of FML hybrid materials resistance to impact. The test results might be useful for the validation of simulations using numerical methods.

The paper presents the impact resistance of new hybrid laminates for aerospace applications. The identification of damage character and failure mechanisms as well as the relationships between damage and impact responses of aluminum/carbon and aluminum/glass hybrid laminates were estimated.

This paper aims to explain the phenomenon of low incidence of COVID-19 in Polish prisons. This paper addresses three questions: was the Polish prison system ready to respond to the threats posed by COVID-19; what action has it taken in this regard; and with what effect?

An analysis of the current condition of the Polish prison system was undertaken focusing on items that were the focus of prisoners’ complaints, the interventions of the Ombudsman and the bulletins of the Central Board of the Prison Service. This analysis has been juxtaposed with the opinions of experts in epidemiology and medicine and changes introduced in the law relating to prisoners.

During the COVID-19 epidemic – despite serious chronic problems in the Polish penitentiary system – the statistics indicated that 24 individuals were infected and no deaths occurred. When compared to the statistics of non-prison cases, this result is extremely low.

Given the newness of the problem, the conflicts of different interests, the “double” isolation of prisons (penal and epidemiological) and the reluctance of the prison administration to provide information about what is happening behind prison walls, researchers must rely on statistics and subjective contacts with prisoners, for example, by investigating their complaints.

As a result of the research, the author believes that the transparency of institutions such as prisons should be ensured, primarily expressed in the provision of information to both prisoners and the public relating to methods adopted to prevent epidemics in the context of prison and prisoners.

The value of this paper is to show how prisons have managed in a new, exceptional situation to balance the right to health and personal safety of prisoners and warders, with the right to contact with the outside world and humane living conditions in a closed and doubly isolated space. The findings presented will add value to the knowledge and effectiveness of the prison administration’s reaction and response to an emergency such as an epidemic.